EasyManuals Logo

Fujitsu PRIMERGY TX300 S8 User Manual

Fujitsu PRIMERGY TX300 S8
792 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #628 background imageLoading...
Page #628 background image
628 Upgrade and Maintenance Manual TX300 S8 / RX350 S8
Front panel and external connectors
Ê Connect a client computer (e.g. notebook) to the front management LAN
connector.
I It is not possible to simultaneously access the iRMC S4 from the front
and rear management LAN connectors. As soon as a LAN cable is
connected to the front management LAN connector, the iRMC S4
cannot be accessed via the rear management LAN connector.
After removing the LAN cable from the front management LAN
connector, the iRMC S4 will immediately become accessible via the
rear management LAN connector again.
Ê Accessing the iRMC S4 using the front management LAN connector is only
possible via the preset IP address 192.168.1.1 and cannot be configured
otherwise.
Configure your client computer to use any static IP address on subnet
192.168.1.x (except 192.168.1.1) with subnet mask 255.255.255.0.
13.2.2 Removing the front LAN connector
13.2.2.1 Preliminary steps
Ê "Suspending BitLocker functionality" on page 125
Ê "Locating the defective server" on page 57
Ê "Shutting down the server" on page 62
Ê "Disconnecting the server from the mains" on page 63.
Ê When working on a rack-mounted server:
"Extending / removing the server from the rack" on page 64
Ê Bring the server to its horizontal position.
Ê "Opening the server" on page 68
Ê "Removing the system air duct" on page 81
Upgrade and Repair Unit
(URU)
Average task duration:
10 minutes
Tools: tool-less

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu PRIMERGY TX300 S8 and is the answer not in the manual?

Fujitsu PRIMERGY TX300 S8 Specifications

General IconGeneral
BrandFujitsu
ModelPRIMERGY TX300 S8
CategoryServer
LanguageEnglish

Related product manuals