12.5.2 Removing a slimline ODD or LSD
12.5.2.1 Preliminary steps
Ê "Removing backup and optical disk media" on page 129
Ê "Shutting down the server" on page 62
Ê "Disconnecting the server from the mains" on page 63
Ê When working on a rack-mounted server:
"Extending / removing the server from the rack" on page 64
Ê "Opening the server" on page 68
I The front cover only needs to be removed in order to install
accessible drive dummy covers (see section "Installing accessible
drive dummy covers" on page 548). If the Multibay will be reinstalled
after removing the slimline ODD or LSD module, skip this step.
Ê "Removing the system air duct" on page 81
Ê "Removing the system fan holder" on page 330
Upgrade and Repair Unit
(URU)
Average task duration:
10 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver
To Next Page
Loading...
Need help?
General