7.4.4.2 Removing the 2x 3.5-inch HDD extension box
Ê Unlock and pull the 2x 3.5-inch HDD extension box out of its installation bays
as described in section "Removing the 2x 3.5-inch HDD extension box" on
page 291.
7.4.4.3 Removing the slimline ODD and LSD module from the defective
HDD extension box
Ê If applicable, remove the slimline ODD from the defective 2x 3.5-inch HDD
extension box as described in section "Removing the slimline ODD from the
extension box" on page 580.
Ê If applicable, remove the LSD module from the defective 2x 3.5-inch HDD
extension box as described in section "Removing the LSD module from the
extension box" on page 583.
7.4.4.4 Installing the slimline ODD and LSD module into the new HDD
extension box
Ê If applicable, reinstall the slimline ODD into the new 2x 3.5-inch HDD
extension box as described in section "Installing the slimline ODD into the
extension box" on page 571.
Ê If applicable, install the LSD module into the new 2x 3.5-inch HDD extension
box as described in section "Installing the LSD module into the HDD
extension box" on page 575.
7.4.4.5 Installing the 2x 3.5-inch HDD extension box
Ê Install the new 2x 3.5-inch HDD extension box as described in section
"Installing the 2x 3.5-inch HDD extension box" on page 287.
7.4.4.6 Concluding steps
Ê "Installing the system fan holder" on page 331
Ê "Installing the system air duct" on page 83
Ê "Closing the server" on page 98
Ê Reinstall all hard disk drives into their original slots in the HDD extension box
as described in section "Installing 3.5-inch HDD modules" on page 254.
To Next Page
Loading...
Need help?
General