14.4.3 Replacing the onboard SAS enabling key
14.4.3.1 Preliminary steps
Ê "Suspending BitLocker functionality" on page 125.
Ê "Locating the defective server" on page 57.
Ê "Shutting down the server" on page 62.
Ê "Disconnecting the server from the mains" on page 63.
Ê When working on a rack-mounted server:
"Extending / removing the server from the rack" on page 64
Ê Open the side / top cover as described in section "Opening the server" on
page 68.
Ê "Removing the system air duct" on page 81.
14.4.3.2 Replacing the onboard SAS enabling key
Ê "Removing onboard SAS enabling key" on page 677
Ê "Installing the onboard SAS enabling key" on page 674
14.4.3.3 Concluding steps
Ê "Installing the system air duct" on page 83
Ê "Closing the server" on page 98
Ê When working on a rack-mounted server:
"Mounting the server in the rack" on page 115
Ê "Connecting the server to the mains" on page 118
Ê If BitLocker functionality is used and has been disabled before starting the
maintenance task: "Resuming BitLocker functionality" on page 152
Upgrade and Repair Unit
(URU)
Average task duration:
5minutes
Tools: tool-less
To Next Page
Loading...
Need help?
General