12.6.3.3 Removing the slimline ODD from the HDD extension box
Ê Remove the defective slimline ODD from the 2x 3.5-inch HDD extension box
as described in section "Removing the slimline ODD from the extension box"
on page 580.
12.6.3.4 Removing the LSD module from the HDD extension box
Ê Remove the defective LSD module from the 2x 3.5-inch HDD extension box
as described in section "Removing the LSD module from the extension box"
on page 583.
12.6.3.5 Installing the slimline ODD into the HDD extension box
Ê Install the new the slimline ODD into the 2x 3.5-inch HDD extension box as
described in section "Installing the slimline ODD into the extension box" on
page 571.
12.6.3.6 Installing the LSD module into the HDD extension box
Ê Install the new LSD module into the 2x 3.5-inch HDD extension box as
described in section "Installing the LSD module into the HDD extension box"
on page 575.
12.6.3.7 Installing the 2x 3.5-inch HDD extension box
Ê Reinstall the 2x 3.5-inch HDD extension box as described in section
"Installing the 2x 3.5-inch HDD extension box" on page 288.
12.6.3.8 Concluding steps
Ê "Installing the system fan holder" on page 331
Ê "Installing the system air duct" on page 83
Ê "Closing the server" on page 98
Ê When working on a rack-mounted server:
"Mounting the server in the rack" on page 115
Ê "Connecting the server to the mains" on page 118
To Next Page
Loading...
Need help?
General