Ê "Removing the system air duct" on page 81
Ê "Removing the system fan holder" on page 330
13.2.3.2 Removing the front panel module
Ê "Removing the front panel module" on page 603
13.2.3.3 Removing the defective front LAN connector
Ê "Removing the front LAN connector" on page 628
13.2.3.4 Installing the new front LAN connector
Ê "Installing the front LAN connector" on page 619
13.2.3.5 Reassembling the front panel module
Ê "Mounting the front panel module cover" on page 609
13.2.3.6 Reinstalling the front panel module
Ê "Installing the front panel module" on page 611
13.2.3.7 Concluding steps
Ê "Installing the system fan holder" on page 331
Ê "Installing the system air duct" on page 83
Ê "Closing the server" on page 98
Ê When working on a rack-mounted server:
"Mounting the server in the rack" on page 115
Ê "Connecting the server to the mains" on page 118
Ê Inform the customer about changed WWN and MAC addresses. For further
information, refer to section "Looking up changed MAC / WWN addresses"
on page 153.
Ê After replacing the front LAN board in a server running Linux OS, update its
MAC address in the related NIC definition file as described in section
"Updating the NIC configuration file in a Linux environment" on page 150.
To Next Page
Loading...
Need help?
General