TX300 S8 / RX350 S8 Upgrade and Maintenance Manual
Only for the Japanese market:
I Although described in this manual, some sections do not apply to the
Japanese market. These options and routines include:
– CSS (Customer Self Service)
Version history
Issue number Reason for update
0.5 / 19-07-2013 Preliminary review version
1.0 / 09-2013 Initial version
1.1 / 09-2013
Minor corrections, removed sections on GPGPU
cards with active cooling
1.2 / 11-2013
Added Nvidia GRID K1 GPGPU card, revised
expansion card and PSU configuration overviews
1.3 / 02-2014
Added Intel Xeon Phi 3120P / 31S1P and Nvidia
GRID K2 coprocessor cards, revised cabling plans
and expansion card overview
1.4 / 04-2014
Minor corrections, revised expansion card overview,
updated cabling plan 16.2.11
1.5 / 07-2014
Added SAS 3.0 topics, added Nvidia K40
coprocessor card, updated power-on indicator
modes, updated charging duration for deeply
discharged BBUs
1.6 / 11-2014
Updated PSU assembly rules, added CPU- and
iRMC-related status signals
1.7 / 12-2014
Added basic software procedure "Resetting the error
status after replacing memory modules or
processors", revised basic software procedures on
disabling and enabling BitLocker, revised information
on power supply modules
1.8 / 03-2015
Revised BitLocker software procedures, added
section "iRMC microSD card"
1.9 / 08-2015 Minor corrections
To Next Page
Loading...
Need help?
General