Ê "Removing the system air duct" on page 81
Ê "Removing the system fan holder" on page 330
7.4.7.2 Removing the 4x 3.5-inch HDD extension box
Ê Unlock and pull the 4x 3.5-inch HDD extension box out of its installation bays
as described in section "Removing the 4x 3.5-inch HDD extension box" on
page 298.
7.4.7.3 Removing the slimline ODD from the defective HDD extension
box
Ê If applicable, remove the slimline ODD from the defective 4x 3.5-inch HDD
extension box as described in section "Removing the slimline ODD from the
extension box" on page 596.
7.4.7.4 Installing the slimline ODD and LSD module into the new HDD
extension box
Ê If applicable, reinstall the slimline ODD into the new 4x 3.5-inch HDD
extension box as described in section "Installing the slimline ODD into the
HDD extension box" on page 589.
7.4.7.5 Installing the 4x 3.5-inch HDD extension box
Ê Install the new 4x 3.5-inch HDD extension box as described in section
"Installing the 4x 3.5-inch HDD extension box" on page 295.
7.4.7.6 Concluding steps
Ê "Installing the system fan holder" on page 331
Ê "Installing the system air duct" on page 83
Ê "Closing the server" on page 98
Ê Reinstall all hard disk drives into their original slots in the HDD extension box
as described in section "Installing 3.5-inch HDD modules" on page 254.
Ê When working on a rack-mounted server:
"Mounting the server in the rack" on page 115
Ê "Connecting the server to the mains" on page 118
To Next Page
Loading...
Need help?
General