4. POINTS, BOUNDARIES
4-18
The following occurs:
• The Goto point is highlighted.
• A purple line and a yellow line appear on the boat icon. The purple line is the course
to follow to get to the point. The yellow line is the shortest course from the current
position to the Goto point.
• The navigation bar (provides destination information) appears at the top of the dis-
play.
For how to use the [Restart] and [STOP] buttons, see section 4.16.
• The waypoint switching method is determined according to the respective setting on
the menu. Select the format by [Settings]→[Routes]→[WPT Switch Mode]. Select
[Circle and Cross Line], [Circle] or [Cross Line].
• The XTE lines, red for port side, green for starboard side, appear. You can show or
hide these lines with [Cross Track Error Lines] in the [Settings]→[Routes] menu.
Note: If you want to be notified when you reach the Goto point (the end of a route),
turn on [End of Route Notification] in the [Routes] menu (see subsection 5.11.9). Then
the message "End of Route" appears when you reach the end of a route. For the ar-
rival timing, see subsection 5.11.5.
STOP (navigation)
button
Restart (navigation)
button
Distance to
waypoint
Bearing to
waypoint
Targeted time of
arrival*
Time to go to next
waypoint*
*
These figures are the same when navigating to a point.
To Next Page
Loading...
Need help?
General