5. ROUTES
5-9
5. To find detailed information about a route, tap [Route Detail] to show route details.
[ID]: Point no. ([Start] or [Goto])
[BTW]: Bearing to Goto point
[SPEED]: Speed to Goto point
[DISTANCE]: Distance from starting point
[TOTAL]: Total distance from start to Goto point
[TTG]*: Time to go to the Goto point, using speed shown in [SPEED] column.
[TOTAL]*: The time from start to the Goto point.
* Shown only when navigating a route
Note: Detailed information can also be displayed as follows:
• From the Home screen, tap [Lists]→[Planning Route Detail].
• Tap an on-screen route, then tap [Edit]→[Route Detail] on the pop-up menu.
6. To edit a route from the [Route Detail] screen, tap the point to edit.
[Lat Lon]: Edit the latitude and longitude position of the point.
[Name]: Change the name of the point.
[Start Nav]: Start navigation from the point selected.
[Find on Chart]: Show the route of the selected point at the center of the chart plot-
ter display.
[Delete]: Delete the selected point. Control is returned to the [Route Detail] screen
and the points of the route are re-numbered.
7. Tap the close button on the title bar to finish.
Vertical bar
To Next Page
Loading...
Need help?
General