Furuno NavNet TZtouch3 Series User Manual

14. AIS, DSC MESSAGE
14-10
14.14 AIS Transponder FA-30, FA-50
The FURUNO AIS Transponder FA-30 (or FA-50) installs in the NavNet TZtouch3 net-
work and can be controlled from a NavNet TZtouch3 display. To access the menu for
the transponder, do as shown below. See the respective operator’s manual for details.
1. Connect the FA-30 (or FA-50) to the NavNet TZtouch3 network.
2. Open the Home screen, then tap [Settings]→[Initial Setup]→[FA30 Browser] (or
[FA50 Browser]).
3. See the Operator’s Manual for the FA-30 (FA-50) for operating procedures.
OR
FAX30 Browser
FA30 Browser
FA50 Browser
FA-30 Browser
FA-50 Browser
Select an
“FA” browser

Furuno NavNet TZtouch3 Series Specifications

General

Brand	Furuno
Model	NavNet TZtouch3 Series
Category	Monitor
Language	English