GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
Chapter 3 - System Setup 3 - 71
3-9-15-2 Display the Dataflow Screen
Follow these steps to display the Dataflow Screen:
1.) Press CONFIG (F2) and log on as administrator.
2.) Select Connectivity > Dataflow.
The Dataflow sheet is displayed, see Figure 3-71 "The Dataflow sheet" on page 3-71.
3.)
Select the dataflow Misc. Export in the Name pull-down menu.
Figure 3-71 The Dataflow sheet
Software version v4.x/v5.x
Software version v6.x:
A new check-box, Show Only Imp/Export
has been added.
To Next Page
Loading...
