GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
3 - 72 Section 3-9 - Connectivity Setup - Software v7.x (BT’08), v6.x, v5.x and v4.x
3-9-15-3 Export to Excel Configuration
1.) Select the Excel storage device in the Selected devices pane and press Properties.
The Excel properties window is displayed.
2.) Select a removable media or a network volume remote path as the destination in the Destination
pull-down menu.
NOTE: Remote paths for network volumes must be entered once in the Remote path field before they
can be selected from the Destination Pull-down menu.
3.) Select OK.
4.) Press CONFIG (F2) if you want to quit Config.
Figure 3-72 The Excel properties window
EXCEL STORAGE
PROPERTIES
To Next Page
Loading...
