GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
Chapter 3 - System Setup 3 - 73
3-9-15-4 Export to MPEGVue Configuration
1.) Select the MPEGVue device in the Selected devices pane and press Properties.
The MPEGVue properties window is displayed.
2.) Select a removable media or a network volume remote path as the destination in the Destination
Pull-down menu.
NOTE: Remote paths of network volumes must be entered once in the Remote path field before they
can be selected from the Destination Pull-down menu.
3.) Check the options as required.
4.) Select OK.
5.) Press CONFIG (F2) if you want to exit Configuration.
Figure 3-73 The MPEGVue properties window
To Next Page
Loading...
