GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
3 - 94 Section 3-10 - Connectivity Setup - Software v3.x
3-10-8-2 DICOM Server IP Address Setting on the Scanner - Software Version v3.x (cont’d)
In Figure 3-98, the selected flow, Worklist/Local Archive - DICOM Server/Int. HD, is shown.
6.) Select Worklist (so it is highlighted) and then select Properties to display the Properties dialog.
Figure 3-98 Worklist/Local Archive - DICOM Server/Int. HD flow
Figure 3-99 Select Worklist Properties dialog
Select Worklist
and then select
Properties
Worklist Properties dialog
To Next Page
Loading...
