Cinterion
®
EHS6 AT Command Set
6.5 AT^SPIC
EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 133 of 513
To avoid conflicts we recommend to use the AT^SPIC read and write commands rather than the execute com-
mand only. The read command clearly states the currently required password, and the write command may
be used to get the counter for a specific <facility>, in this case for example "P2".
+CREG: 1
The mobile ist properly registered to the network.
at+cpin?
+CPIN: READY
The AT+CPIN? read command confirms that SIM
PIN1 authentication was successful.
at^spic
^SPIC: 3
As SIM PIN1 authentication was successful, the
counter relates to SIM PIN2 and correctly indicates
that the user has 3 attempts to enter SIM PIN2.
OK
AT^SPIC?
Likewise, the read command notifies that the ME is
waiting for SIM PIN2.
^SPIC: SIM PIN2
OK
at+clck="SC",0,"456789"
First attempt to enter a wrong SIM PIN1.
+CME ERROR: incorrect password
at^spic
^SPIC: 3
SIM PIN1 authentication is still valid, and the counter
relates to SIM PIN2.
at+clck="SC",0,"456789"
Second attempt to enter a wrong SIM PIN1.
+CME ERROR: incorrect password
at^spic
^SPIC: 3
SIM PIN1 authentication is still valid, and the counter
relates to SIM PIN2.
at+clck="SC",0,"456789"
Third attempt to enter a wrong SIM PIN1.
+CME ERROR: incorrect password
+CREG: 0
SIM PIN1 authentication is no longer valid.
at^spic
^SPIC: 10
This time, after the SIM PIN1 code has been dis-
abled, the counter indicates the status of SIM PIN1
and notifies that 10 attempts are left to enter the SIM
PUK.
To Next Page
Loading...
Need help?
General
