Gemalto Cinterion EHS6 User Manual

Cinterion
®
EHS6 AT Command Set 
8.5 AT+CREG
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 173 of 513
0 Not registered, ME is currently not searching for new operator
1 Registered to home network
2 Not registered, but ME is currently searching for a new operator.
3 Registration denied
4 Unknown (not used)
5 Registered, roaming
ME is registered at a foreign network (national or international network)
Two byte location area code in hexadecimal format (e.g. "00C3" equals 195 in decimal).
Four byte cell ID in hexadecimal format.
Radio access technology
“0“ GSM
“2“ UTRAN
“3“ GSM w/EGPRS
“4“ UTRAN w/HSDPA
“5“ UTRAN w/HSUPA
“6“ UTRAN w/HSDPA and w/HSUPA


Example 
<regStatus>
(num)(&V)
<netLac>
(str)
<netCellId>
(str)
<AcT>
(str)
AT+CREG=2 Activate extended URC mode.
OK
AT+COPS=0 Force ME to automatically search a network operator.
OK
+CREG: 1,"149B","00200EB4",2 URC reports that operator in UMTSnetwork has been found.
AT+COPS? Check network registration with AT+COPS.
+COPS: 0,0,"Telekom.de",2
OK
+CREG: 1,"149B","0020FC9C",2 URC appears again to report that the cellID has changed.

Gemalto Cinterion EHS6 Specifications

General

Brand	Gemalto
Model	Cinterion EHS6
Category	Control Unit
Language	English