Gemalto Cinterion EHS6 - Page 310

Cinterion
®
EHS6 AT Command Set 
11.13 AT+CGQREQ
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 310 of 513
2 Normal priority
Service commitments shall be maintained ahead of precedence class 3
3 Low priority
Service commitments shall be maintained
Delay class
This parameter defines the end-to-end transfer delay incurred in the transmission of SDUs through the GPRS
network(s).
[0] network subscribed value
1..4 with SDU size = 128 octets:

with SDU size = 1024 octets:
Reliability class
[0] network subscribed value
1 Reliability class 1 was removed in 3GPP TS 23.107 [38] v6.1.0, and is auto-
matically mapped to reliability class 2.
2 Non real-time traffic, error-sensitive application that can cope with infrequent
data loss
3 Non real-time traffic, error-sensitive application that can cope with data loss,
GMM/SM, and SMS
4 Real-time traffic, error-sensitive application that can cope with data loss
5 Real-time traffic, error non-sensitive application that can cope with data loss
Peak throughput class
in octets per second
[0] network subscribed value
1 Up to 1 000 (8 kbit/s)
2 Up to 2 000 (16 kbit/s)
3 Up to 4 000 (32 kbit/s)
4 Up to 8 000 (64 kbit/s)
5 Up to 16 000 (128 kbit/s)
<delay>
(num)(NV)
Delay Class Mean Transfer Delay 95 percentile
1 (Predictive) <0.5 <1.5
2 (Predictive) <5 <25
3 (Predictive) <50 <250
4 (Best Effort) Unspecified -
Delay Class Mean Transfer Delay 95 percentile
1 (Predictive) <0.5 <1.5
2 (Predictive) <5 <25
3 (Predictive) <50 <250
4 (Best Effort) Unspecified -
<reliability>
(num)(NV)
<peak>
(num)(NV)