Cinterion
®
EHS6 AT Command Set
14.3 AT+STKTR
EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 370 of 513
Parameter Description
Decimal code that specifies the proactive command. See AT+STKPRO.
Result indicated as decimal code
0 Command performed successfully
1 Command performed with partial comprehension
2 Command performed with missing information
3 REFRESH performed with additional Efs read
4 Command performed successfully, but requested icon could not be displayed
5 Command performed but modified by call control by SIM
6 Command performed successfully, limited service
7 Launch browser
16 Proactive SIM session terminated by the user
17 Backward move in the proactive SIM session requested by the user
18 No response from user
19 Help information required by the user
20 USSD or SS transaction terminated by the user
32 ME currently unable to process command
33 Network currently unable to process the command
34 User did not accept call set-up request
35 User cleared down call before connection or network release
36 Action in contradiction with the current timer state
37 Interaction with call control by SIM, temporary problem
38 Launch browser generic error code
48 Command beyond ME's capabilities
49 Command type not understood by ME
50 Command data not understood by ME
51 Command number not known by ME
52 SS return error
53 SMS RP-ERROR
54 Error, required values are missing
55 USSD return error
57 Interaction with call control by SIM or MO short message control by SIM, per-
manent problem
Additional result
1...255 See 3GPP TS 11.14 [21], 3GPP TS 31.111 [22], ETSI TS 102 223 [23].
Data Coding scheme. See 3GPP TS 23.038 [35].
<ProactCmd>
(num)
<Result>
(num)
<AddResult>
(num)
<Dcs>
(num)
To Next Page
Loading...
Need help?
General
