Cinterion
®
EHS6 AT Command Set
14.7 Examples of how to Configure and Use the USAT
EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 379 of 513
EXAMPLE 5
GET INPUT
OK
+STKCNF: 34,0,255,144
+STKCNF URC confirms that command was suc-
cessfully executed and USAT cycle has finished. No
further PAC required.
+STKPRO:
35,0,4,"456E746572203132333435",5,5,"",0
+STKPRO URC indicates that PAC = 35 (Get input)
is received. The text given in hexadecimal format
means that "Enter 12345" is requested.
AT+STKTR=35,0,0,0,4,"3132333435"
Terminal response command for PAC 35 is sending
"12345" as HEX string "3132333435".
OK
+STKCNF: 34,0,255,144
+STKCNF URC confirms that command was suc-
cessfully executed and USAT cycle has finished. No
further PAC required.
To Next Page
Loading...
