EasyManuals Logo

Gemalto Cinterion EHS6 User Manual

Gemalto Cinterion EHS6
513 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #419 background imageLoading...
Page #419 background image
Cinterion
®
EHS6 AT Command Set
17.4 AT^SJNET
EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 419 of 513
““
(P)
Specifies the Primary DNS server (Nameserver) for the dialup network. The
server address has to be specified in dotted IP address format (e.g.
145.146.147.148). If the parameter is omitted, the DNS assigned by the net-
work is used.
It is recommended to set manual DNS server addresses rather than using
automatic DNS assignment. This avoids problems in case the network is
unable to properly handle the automatic DNS service.
Parameter is global for all interfaces, volatile and will not be reset by AT&F.
Idle Timeout in seconds
0...[30]
(P)
...21600 Specifies the Java network idle timeout, which is the number of seconds to wait
before the network connection is terminated automatically after having closed
the last socket on this connection The value 0 means no timeout at all (you
have to terminate a GPRS connection using AT+CGATT=0).
We recommend to use values greater than 10 seconds because otherwise you
may get unintentional timeouts for slow network connections.
Parameter is global for all interfaces, volatile and will not be reset by AT&F.
<dns>
(str)(+CSCS)
<timeout>
(num)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Gemalto Cinterion EHS6 and is the answer not in the manual?

Gemalto Cinterion EHS6 Specifications

General IconGeneral
BrandGemalto
ModelCinterion EHS6
CategoryControl Unit
LanguageEnglish

Related product manuals