Cinterion
®
EHS6 AT Command Set
2.10 AT+CMEE
EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 48 of 513
517 No TP-Status Report in Phase 1
518 No TP-Reject-Duplicate in Phase 1
519 No TP-Reply-Path in Phase 1
520 No TP-User-Data-Header in Phase 1
521 Missing TP-Validity-Period
522 Invalid TP-Service-Centre-Time-Stamp
523 Missing TP-Destination-Address
524 Invalid TP-Destination-Address
525 Missing Service-Centre-Address
526 Invalid Service-Centre-Address
527 Invalid alphabet
528 Invalid TP-User-Data-Length
529 Missing TP-User-Data
530 TP-User-Data too long(large)
531 No command request in Phase 1
532 Command Request Invalid TP-Destination Address
533 Command Request Invalid TP-User-Data Length
534 Command Request Invalid TP-User-Data
535 Command Request Invalid TP-Command-Type
536 MN MNR creation failed
538 MS Network connection lost
539 Pending MO SM transfer
540 MO SMS rejected by SIM MO SMS control
541 RP ERROR OK
542 RP ERROR OK no icon display
543 FDN check failed
544 Sending of SMS failed. Cause is Service Centre Address (SCA) FDN failed
545 Sending of SMS failed. Cause is Destination Address (DA) FDN failed.
546 BDN check failed
547 Unspecified SMS PP error
548 No Route To Destination
549 Channel Unacceptable
555 No Circuit/Channel Available
556 Access Information Discarded
557 Requested Circuit/Channel Not Available By Other Side
558 Quality Of Service Unavailable
560 Bearer Capability Not Authorized
561 Bearer Capability Not Presently Available
562 Service or Option Not Available, Unspecified
563 Bearer Service Not Implemented
564 ACM Equal to or Greater Than ACMmax
565 Only Restricted Digital Information Bearer Capability Is Available
+CMS <err> Code Text (if AT+CMEE=2)
To Next Page
Loading...
Need help?
General
