Gemalto Cinterion EHS6 User Manual

Cinterion
®
EHS6 AT Command Set 
20.5 AT^SSCNT
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 481 of 513
at^sscnt=2 Request value.
OK
^SSCNT: 10024 "^SSCNT" URC indicates number of pulses counted.
at^sscnt=2 Request value.
OK
^SSCNT: 15134 "^SSCNT" URC indicates number of pulses counted.
at^sscnt=3 Request value and stop pulse counter.
OK
^SSCNT: 21020 "^SSCNT" URC indicates number of pulses counted until this time.
at^sscnt=2 Request value.
OK
^SSCNT: 21020 "^SSCNT" URC still indicates the count of the last run.
at^sscnt=1 Restart pulse counter at the value of the last run.
OK
at^sscnt=2 Request value.
OK
^SSCNT: 22123 "^SSCNT" URC indicates number of pulses incremented from the last
run.

Gemalto Cinterion EHS6 Specifications

General

Brand	Gemalto
Model	Cinterion EHS6
Category	Control Unit
Language	English