Keysight Technologies 6811C Programming Guide

C Error Messages
304 Keysight Models 6811C, 6812C, and 6813C Programming Guide
System errors –300 through –399 (sets Standard Event Status Register bit #3)
–310 System error [generic]
–350 Too many errors [errors beyond 9 lost due to queue overflow]
Query errors –400 through –499 (sets Standard Event Status Register bit #2)
–400 Query error [generic]
–410 Query INTERRUPTED [query followed by DAB or GET before response complete]
–420 Query UNTERMINATED [addressed to talk, incomplete programming message received]
–430 Query DEADLOCKED [too many queries in command string]
–440 Query UNTERMINATED [after indefinite response]
Self-test errors 0 through 99 (sets Standard Event Status Register bit #3)
0No error
1 Non-volatile RAM RD0 section checksum failed
2 Non-volatile RAM CONFIG section checksum failed
3 Non-volatile RAM CAL section checksum failed
4 Non-volatile RAM WAVEFORM section checksum failed
5 Non-volatile RAM STATE section checksum failed
6 Non-volatile RAM LIST section checksum failed
7 Non-volatile RAM RST section checksum failed
10 RAM self-test
11 - 31 DAC self-test error, expected <n>, read <reading>
40 Voltage self-test error, output 1
41 Voltage self-test error, output 2
42 Voltage self-test error, output 3
43 Current self-test error, output 1
44 Current self-test error, output 2
45 Current self-test error, output 3
Table C-1 Error numbers (continued)
Error # Error string [description/explanation/examples]

Keysight Technologies 6811C Specifications

General

Brand	Keysight Technologies
Model	6811C
Category	Measuring Instruments
Language	English