Error Messages C
Keysight Models 6811C, 6812C, and 6813C Programming Guide 305
60 FPGA JTAG error
61 FPGA image invalid
62 Model detection FPGA version invalid
63 Analog voltage rail failed
64 Model detection FPGA model bit invalid
65 Model detection EEPROM model checksum failed
66 Model detection between FPGA and EEPROM incompatible
67 EEPROM version is higher than expected
70 Fan voltage failure
71 3.3 V voltage failed
72 5 V voltage failed
80 Digital I/O self-test error
90 Non-volatile RAM IO DATA section checksum failed
91 Non-volatile RAM ROM VERS section checksum failed
92 Non-volatile RAM SERIAL section checksum failed
93 Non-volatile RAM MAC ADDR section checksum failed
94 Non-volatile RAM LAN section checksum failed
95 Non-volatile RAM HTTP section checksum failed
96 Non-volatile RAM PERSONA section checksum failed
97 Non-volatile RAM CAL INFO section checksum failed
Table C-1 Error numbers (continued)
Error # Error string [description/explanation/examples]
To Next Page
Loading...
Need help?
General
