Lexmark 940e - X Color Laser Service Manual

2-194 Service Manual
7510
Waste toner cartridge nearly full
4
Perform a POR.
Does the error remain when the power is turned off/on
again?
Replace the upper
printer engine card
assembly.
Go to “Upper
printer engine
card assembly
removal” on
page 4-77.
Problem solved.
Step Check Yes No
1 Check the waste toner cartridge.
Is the above component properly installed?
Go to step 2. Reinstall the waste
toner cartridge.
2
Check the sensor (waste toner cartridge full) for proper
operation.
1. Enter the Diagnostics Menu.
2. Touch BASE SENSOR TEST.
3. Touch Exit level.
4. Touch Standard bin full 1.
Does the display on the operator panel, change every time
the sensing area of the above sensor is interrupted or
blocked?
Go to step 5. Go to step 3.
3
Check the sensor (waste toner cartridge full) connection.
Is the above component properly connected?
Replace the
sensor (waste
toner cartridge
full).
Go to “Sensor
(waste toner
cartridge full)
removal” on
page 4-40.
Replace the
connection.
4
Perform a POR.
Does the error remain when the power is turned off/on
again?
Replace the upper
printer engine card
assembly.
Go to “Upper
printer engine
card assembly
removal” on
page 4-77.
Problem solved.
Step Check Yes No

Lexmark 940e - X Color Laser Specifications

General

Brand	Lexmark
Model	940e - X Color Laser
Category	All in One Printer
Language	English