Diagnostic aids 3-21
7510
• Maintenance Count Resets
• NV Resets and various types of JFFS@ partition formats
Touch EVENT LOG from the Diagnostics Menu, and the following options are displayed:
Display Log
Print Log
Clear Log
Display the Event Log
Note: The displayed version of the Event Log shows only a subset of the information contained in the
Diagnostics version of the printed Event Log. For the most comprehensive information about each logged event,
print the Event Log. See “Print the Event Log” on page 3-22.
Touch Display Log, and a graphic similar to the following appears on the LCD:
Each logged event is identified by the text that appeared when the event occurred. For instance, if the log
recorded a 900 Service Error, the Display Log would show 900 Service RIP Software. Log entries appear
in chronological order.
If additional log entries exist, touch to view the next log entries. Continue following this procedure until you
reach the end of the logged entries. To view earlier log entries, touch .
Touch Back to return to the EVENT LOG.
To Next Page
Loading...
Need help?
General
