Rigging work
11.8 Outrigger operation
11 - 56 3 302 633 en Operating Instructions GMK5250L
27.09.2017
Extending/retracting supporting cylinders
• Observe the safety instructions for operating the supporting cylinders;
à p. 11 - 53.
• Press the button combination for the desired movement:
The pre-selected supporting cylinders move until you let go of the respec-
tive button or until the respective end position has been reached.
From the
crane cab
The following operating elements are found in the
Outrigger menu.
Start the engine
• Start the engine from the crane cab; à p. 9 - 5.
• Switch off the slewing gear; à p. 10 - 119.
Open menu
• Open the Outrigger menu (1).
• Select and confirm the symbol (2) –
Move outrigger cylinders.
1 Extend
2 Retract
To Next Page
Loading...
Need help?
General
