187
F3SG-SR
User’s Manual
Chapter4 Basic Operation of SD Manager 3
Setting with SD Manager 3
E
For operator and administrator levels, refer to 4-2-5. Logging In/Logging Out.
For reading of the configuration data saved in the Intelligent Tap, refer to 4-2-7-1. Reading Configuration from Intelligent
Tap.
When connecting the Intelligent Tap to a F3SG-SR and trying to return the F3SG-SR to [Detecting], follow step 4 of
4-1-3-2. Connection Procedure When Using USB Connector to restart the F3SG-SR and Intelligent Tap, or click the
[Monitor] button.
Writing Configuration File Saved in PC into Intelligent Tap
Check that the Intelligent Tap is correctly connected and log in with the administrator level.
By selecting the [Open] button from the [Main] menu on the tool bar or clicking the [Open]
button directly from the tool menu, and select the configuration file (with extension sdm3) saved in
an arbitrary location.
Click the [Write] button to write the configuration.
F3SG-SR Not Connected:
Configuration data can be written to the Intelligent Tap.
To write the configuration data written to the Intelligent Tap to the F3SG-SR, refer to 3-6-3. Performing
Restoration to perform restoration.
F3SG-SR Connected:
Configuration data can be written to the Intelligent Tap and F3SG-SR.
For operator and administrator levels, refer to 4-2-5-1. Logging In.
For the target sensor in the cascaded configuration, refer to 4-2-3-2. Description on Top Page and Each Button.
For reading of the configuration file saved in the PC, refer to 4-2-4-2. Reading Configuration from PC.
When connecting the Intelligent Tap to a F3SG-SR and trying to return the F3SG-SR to [Detecting], follow step 4 of
4-1-3-2. Connection Procedure When Using USB Connector to restart the F3SG-SR and Intelligent Tap, or click the
[Monitor] button.
To Next Page
Loading...
