Omron F3SG-SRB Series - Mounted with Adjustable Top;Bottom Brackets (F3 SJ, F3 SN Adapter) (F39-LSGTB-SJ); And Adjustable Side-Mount Brackets (Intermediate Brackets) (F39-LSGA); Mounted with Adjustable Top;Bottom Brackets

265
F3SG-SR
User’s Manual
Chapter5 Dimensions
Wiring and Installation
E
5-2-1-4. Mounted with Adjustable Top/Bottom Brackets (F3SJ, F3SN Adapter) (F39-LSGTB-
SJ) and Adjustable Side-Mount Brackets (Intermediate Brackets) (F39-LSGA)
 Backside Mounting
5-3-4-4. Mounting with Adjustable Top/Bottom Brackets (F3SJ, F3SN Adapter) (F39-LSGTB-SJ) and Adjustable Side-
Mount Brackets (Intermediate Brackets) (F39-LSGA)
- Use the brackets of specified quantities and locations according to the dimensions. The other brackets than described
above may not meet the specified ratings and performance.
- When you use the sensor in a situation where the sensor is under a load, increase the number of the brackets used.
- The Adjustable Top/Bottom Bracket and Adjustable Side-Mount Bracket allow beam alignment after fixing the bracket to a wall surface. The angle
adjustment range of the Adjustable Top/Bottom Brackets is ±22.5°. The angle adjustment range of the Adjustable Side-Mount Brackets is ±15°.
<Screw for Adjustable
Top/Bottom Bracket:
M8 * 1>
73
20
56.5
6.3
4
50
C
56.5
F
4
H
2-M8
2-M5
or M6
19
56.5
19
2-M5
or M6
C
F
4
G
4-M5
<Screw for Adjustable
Top/Bottom Bracket:
M5
* 1>
19
46.7
32
5.8
C(Protective height)
I
N2 N1
10
P
F
G
H
1.7
D
9 dia.
3.2
38
Adjustable
Top/Bottom Bracket
(F39-LSGTB-SJ)
12
Adjustable
Top/Bottom Bracket
(F39-LSGTB-SJ)
Adjustable
Side-Mount Bracket
(F39-LSGA)
[ Unit : mm ]
*1. Adjustable Side-Mount Bracket: M5 or M6
*2. For the model of protective height of 0160, the numbers corresponding to dimensions N1 and N2 are 20 to 30.
*3. The number of brackets required to mount either one of emitter and receiver.
Dimension C
4-digit number of the type name (Protective height: )
Dimension D
F3SG-SR-14
C-20
F3SG-SR25
F3SG-SR-45
C-40
F3SG-SR-85
Dimension G C+27.2+N1+N2
Dimension H C+38+N1+N2
Dimension I C+58+N1+N2
Dimension N1 0 to 30 *2
Dimension N2 0 to 30 *2
Dimension P
F3SG-SR-14 10
F3SG-SR-25 20
F3SG-SR-45 40
F3SG-SR-85 80
Protective height
(Dimension C)
Number of
Adjustable
Top/Bottom
Bracket *3
Number of
Intermediate
Bracket *3
Dimension F
0160 to 0840 2 0 -
0880 to1680 2 1 1000 mm max.
1760 to 2480 2 2 1000 mm max.