201
F3SG-SR
User’s Manual
Chapter4 Changing Settings with SD Manager 3
Setting with SD Manager 3
E
Out of the three-color ABI patterns, if more than one type of signal information of the configured output operation mode
occur simultaneously, the ABI illuminates in the ABI pattern color of the highest priority. (Priority high: red > orange >
green: low)
For more information on area beam indicator (ABI), refer to 2-22. Area Beam Indicator (ABI).
When changing the settings is complete, confirm the settings and write the configuration to the F3SG-SR.
To enable the written configuration, refer to 4-2-7-3. Writing Configuration into Intelligent Tap.
When connecting the Intelligent Tap to a F3SG-SR and trying to return the F3SG-SR to [Detecting], follow step 4 of
4-1-3-2. Connection Procedure When Using USB Connector to restart the F3SG-SR and Intelligent Tap, or click the
[Monitor] button.
To Next Page
Loading...
Need help?
General
