238
Chapter4 Basic Operation of SD Manager 3 Mobile APP
F3SG-SR
User’s Manual
Setting with SD Manager 3
If the device is not connected
If the device is not connected, no dialog message is displayed.
In addition, a pop-up message saying “Not connected with the sensor” is displayed when tapping each
icon.
If pairing is has not been done yet, refer to 4-5-3. Pairing (Connection Verification).
If unable to connect with the sensor although pairing is already completed, confirm again that the Bluetooth
®
communication function of the smartphone or tablet is ON.
To Next Page
Loading...
