Omron F3SG-SRB Series - Page 28

xxvi
Introduction
F3SG-SR
User’s Manual
6-2-1-11. Double Break with EDM 326
6-2-2. Muting System Wiring Examples 327
6-2-2-1. Standard Muting Mode/Exit-Only Muting Mode 327
6-2-2-2. Standard Muting Mode/Exit-Only Muting Mode with Y-Joint Plug 328
6-2-2-3. Standard Muting Mode/Exit-Only Muting Mode with Intelligent Tap 329
6-2-2-4. Standard Muting Mode/Exit-Only Muting Mode with Reset Switch Connector 330
6-3. Connectable Safety Control Units 331
Chapter7 Checklists 333
7-1. Pre-Operation Checklists 334
7-1-1. Checklists 334
7-1-1-1. Installation Condition Check 334
7-1-1-2. Wiring Check Before Power Is Turned ON 334
7-1-1-3. Operation Check While the Machine Is Stopped 335
7-1-1-4. Checking that Hazardous Parts Stop While the Machine Operates 336
7-2. Maintenance Checklists 337
7-2-1. Checklists 337
7-2-1-1. Inspection at Startup and When Changing Operators 337
7-2-1-2. Checking that Hazardous Parts Stop While the Machine Operates 338
7-2-1-3. Items to Inspect Every 6 Months or When Machine Settings Are Changed 338
Chapter8 Appendix 341
8-1. Troubleshooting 342
8-1-1. LED Indicators (F3SG-SR) 342
8-1-2. LOCKOUT State 343
8-1-2-1. Description 343
8-1-2-2. Troubleshooting 344
8-1-3. Warning 349
8-1-3-1. Description 349
8-1-3-2. Troubleshooting 349
8-1-3-3. Muting Sequence Error Indication 350
8-1-3-4. Interlock Sequence Error Indication 351
8-1-3-5. PSDI Sequence Error Indication 352
8-1-4. Troubleshooting for Intelligent Tap 353
8-1-5. Troubleshooting for Bluetooth® Communication Unit 356
8-2. Optional Accessories (Sold Separately) 357
8-3. Glossary 365
8-4. Revision History 369