260
Chapter5 Dimensions
F3SG-SR
User’s Manual
Wiring and Installation
Side Mounting
5-3-4-1. Mounting with Side-Mount Brackets (Intermediate Brackets) (F39-LSGF)
- Use the brackets of specified quantities and locations according to the dimensions. The other brackets than described
above may not meet the specified ratings and performance.
- When you use the sensor in a situation where the sensor is under a load, increase the number of the brackets used.
- Beam alignment cannot be performed with Side-Mount Brackets.
6.3 dia.
Side-Mont
Bracket
(F39-LSGF)
Side-Mont
Bracket
(F39-LSGF)
250 max. 250 max. F
10
P
D
250 max. F 250 max.
C
8.2
8.2
<Screw: M5 or M6>
38
50
8.2
19.4
46.7
C(Protective height)
32
2-M5
or M6
2-M5
or M6
[ Unit : mm ]
* The number of brackets required to mount either one of emitter and receiver. The side-mount brackets (intermediate brackets) are included with
the light curtain.
Dimension C
4-digit number of the type name (Protective height:
)
Dimension D
F3SG-SR-14
C-20
F3SG-SR-25
F3SG-SR-45
C-40
F3SG-SR-85
Dimension P
F3SG-SR-14
10
F3SG-SR-25
20
F3SG-SR-45
40
F3SG-SR-85
80
Protective height
(Dimension C)
Number of Side-Mount
Bracket *
Dimension F
0160 to 1440 2 1000 mm max.
1520 to 2480 3 1000 mm max.
To Next Page
Loading...
