Panasonic FP Series User Manual

Program execution control instructions
1012
Part III FP Instructions
ST
When programming with structured text, enter the following:
(* if Start is true Counter will be incremented by 1, else by 2 *)
IF Start THEN
F19_SJP(_label);
END_IF;
Counter:=Counter+1;
LBL(1);
Counter:=Counter+1;

Panasonic FP Series Specifications

General

Mounting	DIN rail
Type	PLC
Communication Interface	RS-232, RS-485, Ethernet (depending on model)
Input Voltage	100-240V AC or 24V DC (depending on model)
Output Type	Relay, Transistor
I/O Points	Varies by model
Operating Temperature	0°C to 55°C
Dimensions	Varies by model
Weight	Varies by model