Panasonic FP Series User Manual

Pulse output instructions
1233
Part IV Tool Instructions
PulseInfo_ReadCorrecte
dInitialSpeed
Reads corrected value of initial speed
See also:
Pulse output tool instructions in the online help
PLC types see page 1329
Variable Data type Function
iChannel Pulse output channel:
FP
: 0, 2
FP-X R: 0, 1
FP-X 16K C14T: 0, 1, 2
FP-X 32K C30T, C60T: 0, 1, 2, 3
FP0R: 0, 1, 2, 3
FP0: 0, 1
FP-e: 0, 1
Output variable
INT
Stores the value of the corrected initial speed
Description
This instruction returns the value of the corrected initial speed on the channel specified by
iChannel.
Data types
Example
In this example the function has been programmed in ladder diagram (LD) and structured text (ST).
The same POU header is used for all programming languages.
POU header
All input and output variables used for programming this function have been declared in the POU
header.
Body
LD
ST
When programming with structured text, enter the following:
iCorrectedInitialSpeed := PulseInfo_ReadCorrectedInitialSpeed(iChannel :=
iChannel);

Panasonic FP Series Specifications

General

Mounting	DIN rail
Type	PLC
Communication Interface	RS-232, RS-485, Ethernet (depending on model)
Input Voltage	100-240V AC or 24V DC (depending on model)
Output Type	Relay, Transistor
I/O Points	Varies by model
Operating Temperature	0°C to 55°C
Dimensions	Varies by model
Weight	Varies by model