Panasonic FP Series User Manual

Basics
57
Example:
Value Conversion function Result
IPADDR_TO_STRING 004.003.002.001 16#01020304
IPADDR_TO_STRING_NO
_LEADING_ZEROS
4.3.2.1

NOTE
If you want an interpretation of the DWORD in direct order, use the conversion functions that
invoke the data type ETLANADDR.
1.4.5.8 ETLANADDR
The data type ETLANADDR only occurs in the following conversion functions:
 ETLANADDR_TO_STRING (see page 234)
 ETLANADDR_TO_STRING_NO_LEADIN
G_ZEROS (see page 235)
 STRING_TO_ETLANA
DDR (see page 249)
 STRING_TO_ETLANADDR_STEPSAVER
These conversi
on functions interpret variables of the type DWORD as strings in ETLANADDR format. This
format consists of four octal numbers (with or without leading zeros) seperated by periods in direct order, i.e. the
highest octal number in the ETLANADDR number will be the highest octal number in the string.
Example:
Value Conversion function Result
ETLANADDR_TO_STRING 001.002.003.004 16#01020304
ETLANADDR_TO_STRING_
NO_LEADING_ZEROS
1.2.3.4

NOTE
If you want an interpretation of the DWORD in inverse order, use the conversion functions
invoking the data type IPADDR.
1.4.5.9 ANY_IN_UNITS_OF_WORDS
Allowed are:
 Data types INT, DINT, WORD, DWORD, REAL, STRING, TIME
 Arrays with data types other than BOOL
 All DUTs that contain elements with data types besides BOOL
Note:
These data types can lie in the following areas: WX, DWX, WY, DWY, WR, DWR, WL, DWL, SV,
DSV, EV, DEV, DT, DDT, LD, DLD, FL, DFL. For failure to make an assignment in the address field

Panasonic FP Series Specifications

General

Mounting	DIN rail
Type	PLC
Communication Interface	RS-232, RS-485, Ethernet (depending on model)
Input Voltage	100-240V AC or 24V DC (depending on model)
Output Type	Relay, Transistor
I/O Points	Varies by model
Operating Temperature	0°C to 55°C
Dimensions	Varies by model
Weight	Varies by model