Panasonic FP Series

Pulse output instructions
1232
Part IV Tool Instructions
PulseInfo_ReadCorrected
FinalSpeed
Reads corrected value of final speed
See also:
Pulse output tool instructions in the online help
PLC types see page 1329
Variable Data type Function
iChannel Pulse output channel:
FP
: 0, 2
FP-X R: 0, 1
FP-X 16K C14T: 0, 1, 2
FP-X 32K C30T, C60T: 0, 1, 2, 3
FP0R: 0, 1, 2, 3
FP0: 0, 1
FP-e: 0, 1
Output variable
INT
Stores the value of the corrected final speed
Description
This instruction returns the value of the corrected final speed on the channel specified by
iChannel.
Data types
Example
In this example the function has been programmed in ladder diagram (LD) and structured text (ST).
The same POU header is used for all programming languages.
POU header
All input and output variables used for programming this function have been declared in the POU
header.
Body
LD
ST
When programming with structured text, enter the following:
iCorrectedFinalSpeed:= PulseInfo_ReadCorrectedFinalSpeed(iChannel :=
iChannel);