Panasonic FP Series User Manual

High-speed counter instructions
1158
Part IV Tool Instructions
HscInfo_IsActive
Checks if high-speed counter is active
See also:
 Tool instructions: overview of high-speed counter instructions
 HscControl_HscInstructionClear (see page 1147)
PLC types see page 1327
Variable Data type Function
iChannel INT High-speed counter channel:
FP
: 0, 2
FP-X R: 0, 1
FP-X 16K C14T: 0, 1, 2
FP-X 32K C30T, C60T: 0, 1, 2, 3
FP0R: 0, 1, 2, 3
FP0: 0, 1
FP-e: 0, 1
Output variable BOOL TRUE if the high-speed counter channel specified by iChannel is
active
Description
This instruction evaluates the high-speed counter control flag and returns TRUE if the high-speed
counter channel specified by iChannel is active.
Data types
Example
In this example the function has been programmed in ladder diagram (LD) and structured text (ST).
The same POU header is used for all programming languages.
POU header
All input and output variables used for programming this function have been declared in the POU
header.
Body
LD
ST
When programming with structured text, enter the following:
bChannelActive := HscInfo_IsActive(iChannel := iChannel);

Panasonic FP Series Specifications

General

Mounting	DIN rail
Type	PLC
Communication Interface	RS-232, RS-485, Ethernet (depending on model)
Input Voltage	100-240V AC or 24V DC (depending on model)
Output Type	Relay, Transistor
I/O Points	Varies by model
Operating Temperature	0°C to 55°C
Dimensions	Varies by model
Weight	Varies by model