Panasonic FP Series User Manual

Pulse output instructions
1220
Part IV Tool Instructions
39.4 Pulse information instructions
In this section:
- PulseInfo_GetControlCode (see page 1221)
- PulseInfo_GetCurrentSpeed (see page 1222)
- PulseInfo_IsActive (see page 1224)
- PulseInfo_IsChannelEnabled (see page 1225)
- PulseInfo_IsCountingDisabled (see page 1226)
- PulseInfo_IsElapsedValueReset (see page 1227)
- PulseInfo_IsHomeInputTrue (see page 1228)
- PulseInfo_IsPulseOutputStopped (see page 1229)
- PulseInfo_IsTargetValueMatchActive (see page 1230)
- PulseInfo_ReadAccelerationForbiddenAreaStartingPosition (see page 1231)
- PulseInfo_ReadCorrectedFinalSpeed (see page 1232)
- PulseInfo_ReadCorrectedInitialSpeed (see page 1233)
- PulseInfo_ReadElapsedValue (see page 1234)
- PulseInfo_ReadTargetValue (see page 1235)
- PulseInfo_ReadTargetValueMatchValue (see page 1236)

Panasonic FP Series Specifications

General

Mounting	DIN rail
Type	PLC
Communication Interface	RS-232, RS-485, Ethernet (depending on model)
Input Voltage	100-240V AC or 24V DC (depending on model)
Output Type	Relay, Transistor
I/O Points	Varies by model
Operating Temperature	0°C to 55°C
Dimensions	Varies by model
Weight	Varies by model