Panasonic FP Series User Manual

Data transfer via communication ports
764
Part III FP Instructions
IsTransmissionDone
Evaluation of "transmission done" flag for all ports
Description
This function returns the value of the "transmission done" flag. The "transmission done" flag (see
page 757) is TRUE if the specified number of bytes has been sent from the assigned
comm
unication port of the PLC.
Example

Panasonic FP Series Specifications

General

Mounting	DIN rail
Type	PLC
Communication Interface	RS-232, RS-485, Ethernet (depending on model)
Input Voltage	100-240V AC or 24V DC (depending on model)
Output Type	Relay, Transistor
I/O Points	Varies by model
Operating Temperature	0°C to 55°C
Dimensions	Varies by model
Weight	Varies by model