Panasonic FP Series User Manual

High-speed counter instructions
1139
Part IV Tool Instructions
38.2 High-speed counter control instructions
In this section:
- HscControl_CountingDisable (see page 1140)
- HscControl_CountingEnable (see page 1142)
- HscControl_ElapsedValueContinue (see page 1144)
- HscControl_ElapsedValueReset (see page 1146)
- HscControl_HscInstructionClear (see page 1148)
- HscControl_ResetInputDisable (see page 1150)
- HscControl_ResetInputEnable (see page 1151)
- HscControl_SetDefaults (see page 1152)
- HscControl_WriteElapsedValue (see page 1153)

Panasonic FP Series Specifications

General

Mounting	DIN rail
Type	PLC
Communication Interface	RS-232, RS-485, Ethernet (depending on model)
Input Voltage	100-240V AC or 24V DC (depending on model)
Output Type	Relay, Transistor
I/O Points	Varies by model
Operating Temperature	0°C to 55°C
Dimensions	Varies by model
Weight	Varies by model