Panasonic FP Series User Manual

Pulse output instructions
1198
Part IV Tool Instructions
39.3 Pulse control instructions
In this section:
- PulseControl_CountingDisable (see page 1199)
- PulseControl_CountingEnable (see page 1201)
- PulseControl_DeceleratedStop (see page 1203)
- PulseControl_ElapsedValueContinue (see page 1205)
- PulseControl_ElapsedValueReset (see page 1207)
- PulseControl_JogPositionControl (see page 1209)
- PulseControl_NearHome (see page 1210)
- PulseControl_PulseOutputContinue (see page 1212)
- PulseControl_PulseOutputStop (see page 1214)
- PulseControl_SetDefaults (see page 1216)
- PulseControl_WriteElapsedValue (see page 1217)
- Pulse_TargetValueMatchClear (see page 1219)

Panasonic FP Series Specifications

General

Mounting	DIN rail
Type	PLC
Communication Interface	RS-232, RS-485, Ethernet (depending on model)
Input Voltage	100-240V AC or 24V DC (depending on model)
Output Type	Relay, Transistor
I/O Points	Varies by model
Operating Temperature	0°C to 55°C
Dimensions	Varies by model
Weight	Varies by model