Panasonic FP Series User Manual

Comparison instructions
620
Part III FP Instructions
19.1 Further comparison instructions
If you need information on one of the following comparison instructions, please refer to the corresponding
standard operators in the online help:
ST= AN= OR= STD= AND= ORD=
ST<> AN<> OR<> STD<> AND<> ORD<>
ST> AN> OR> STD> AND> ORD>
ST>= AN>= OR>= STD>= AND>= ORD>=
ST< AN< OR< STD< AND< ORD<
ST<= AN<= OR<= STD<= AND<= ORD<=

Panasonic FP Series Specifications

General

Mounting	DIN rail
Type	PLC
Communication Interface	RS-232, RS-485, Ethernet (depending on model)
Input Voltage	100-240V AC or 24V DC (depending on model)
Output Type	Relay, Transistor
I/O Points	Varies by model
Operating Temperature	0°C to 55°C
Dimensions	Varies by model
Weight	Varies by model