Panasonic FP Series User Manual

High-speed counter instructions
1144
Part IV Tool Instructions
HscControl_Elapsed
ValueContinue
Continues counting after reset
See also:
 Tool instructions: overview of high-speed counter instructions
 HscControl_WriteElapsedValue (see page 1152)
 HscInfo_Rea
dElapsedValue (see page 1163)
 HscInfo_IsElapsedVal
ueReset (see page 1160)
To add an enable inp
ut and enable output to the instruction, select [With EN/ENO] from the
"Instructions" pane (LD, FBD or IL editor). To reuse an instruction select "Recently used" from the
context menu or press <Ctrl>+<Shift>+<v> in the programming window.
PLC types see page 1327
Variable Data type Function
iChannel INT High-speed counter channel:
FP
: 0, 2
FP-X R: 0, 1
FP-X 16K C14T: 0, 1, 2
FP-X 32K C30T, C60T: 0, 1, 2, 3
FP0R: 0, 1, 2, 3
FP0: 0, 1
FP-e: 0, 1
Description
This instruction resumes counting on the channel specified by iChannel after a reset of the
elapsed value using HscControl_ElapsedValueReset (see page 1145). Bit 0 of the high-speed
counter control code (see
page 891) is set to FALSE.
Data types
Example
In this example the function has been programmed in ladder diagram (LD) and structured text (ST).
The same POU header is used for all programming languages.
POU header
All input and output variables used for programming this function have been declared in the POU
header.
Body
When the variable bElapsedValueContinue is set to TRUE, counting resumes on the channel
specified by iChannel.
LD

Panasonic FP Series Specifications

General

Mounting	DIN rail
Type	PLC
Communication Interface	RS-232, RS-485, Ethernet (depending on model)
Input Voltage	100-240V AC or 24V DC (depending on model)
Output Type	Relay, Transistor
I/O Points	Varies by model
Operating Temperature	0°C to 55°C
Dimensions	Varies by model
Weight	Varies by model