Panasonic FP Series User Manual

2
Important symbols
One or more of the following symbols may be used in this documentation:
!
DANGER!
The warning triangle indicates especially important safety
instructions. If they are not adhered to, the results could be
fatal or critical injury.
CAUTION
Indicates that you should proceed with caution. Failure to do so may result in injury or
significant damage to instruments or their contents, e.g. data.

NOTE
Contains important additional information.

EXAMPLE
Contains an illustrative example of the previous text section.
1.
2.
3.
Procedure
Indicates that a step-by-step procedure follows.
REFERENCE
Indicates where you can find additional information on the subject at hand.

Panasonic FP Series Specifications

General

Mounting	DIN rail
Type	PLC
Communication Interface	RS-232, RS-485, Ethernet (depending on model)
Input Voltage	100-240V AC or 24V DC (depending on model)
Output Type	Relay, Transistor
I/O Points	Varies by model
Operating Temperature	0°C to 55°C
Dimensions	Varies by model
Weight	Varies by model