Panasonic FP Series User Manual

Conversion instructions
195
Part II IEC Instructions
DINT_TO_REAL
DOUBLE INTEGER into REAL
To add an enable input and enable output to the instruction, select [With EN/ENO] from the
"Instructions" pane (LD, FBD or IL editor). To reuse an instruction select "Recently used" from the
context menu or press <Ctrl>+<Shift>+<v> in the programming window.
PLC types Availability of DINT_TO_REAL (see page 1319)
Data type I/O Function
DINT input input data type
REAL output conversion result
Description
DINT_TO_REAL converts a value of the data type DOUBLE INTEGER into a value of the data type
REAL.
Data types
Example
In this example, the same POU header is used for all programming languages. For an example
using IL (instruction list), please refer to the online help.
POU header
All input and output variables used for programming this function have been declared in the POU
header.
This example uses variables. You may also use a constant for the input variable
Body
DINT_value of the data type DOUBLE INTEGER is converted into a value of the data type REAL.
The converted value is stored in REAL_value.
LD
ST
When programming with structured text, enter the following:
REAL_value:=DINT_TO_REAL(DINT_value);

Panasonic FP Series Specifications

General

Mounting	DIN rail
Type	PLC
Communication Interface	RS-232, RS-485, Ethernet (depending on model)
Input Voltage	100-240V AC or 24V DC (depending on model)
Output Type	Relay, Transistor
I/O Points	Varies by model
Operating Temperature	0°C to 55°C
Dimensions	Varies by model
Weight	Varies by model