Conversion instructions
234
Part II IEC Instructions
IPADDR_TO_STRING_
NO_LEADING_ZEROS
IP Address to STRING
Permissible format:
'Octet1.Octet2.Octet3.Octet4', e.g.: '192.168.206.4'
Permissible characters:
Octets 1-4 Decimal numbers "0“-"9“, maximal 3 positions, without leading zeros in
the range 0-255
The conversion is such that the highest byte of the ET-LAN address represents the fourth octet and
lowest byte of the IP address the first octet. The format of the IP address corresponds to the
standard format as used in "Standard Socket Application Interfaces", for example.
Description
This function converts a binary IP address of the data type DWORD into a STRING in IP address
format.
Example
To Next Page
Loading...
