Panasonic FP Series

Pulse output instructions
1077
Part III FP Instructions
Example
In this example the function is programmed in ladder diagram (LD). The same POU header is used
for all programming languages. This example is programmed for the FP-. The parameters for the
FP0R are only slightly different.
DUT
The DUT F175_PulseOutput_Linear_DUT_0 is predefined in the FP Library.
POU header
All input and output variables used for programming this function have been declared in the POU
header.
LD
ST
When programming with structured text, enter the following:
IF DF(bTrigger) THEN
F175_PulseOutput_Linear(n_iPulseOutputChannel := 0,
s_dutDataTable := dutLinearData);
END_IF;