Analog unit instructions
1101
Part IV Tool Instructions
iInChannel7 => iInChannel7);
LD
ST
When programming with structured text, enter the following:
Uint_AnalogInput(iModuleOffsetWX := iModuleOffsetWX,
iInChannel0 => iInChannel0,
iInChannel1 => iInChannel1,
iInChannel2 => iInChannel2,
iInChannel3 => iInChannel3,
iInChannel4 => iInChannel4,
iInChannel5 => iInChannel5,
iInChannel6 => iInChannel6,
To Next Page
Loading...
